1pcs 30a 250v 1 channel 12v relay module high level driver high power relay



4-Channel 12V Opto-isolator Relay Module w/ High Level Trigger - Blue 4-Channel 12V Opto-isolator Relay Module w/ High Level Trigger - Blue Новинка

4-Channel 12V Opto-isolator Relay Module w/ High Level Trigger - Blue

390.53 руб.
Brand N/A Model N/A Quantity 1 Color Blue Material PCB Features Good anti-interference performance use optoelectronic isolation and freewheeling diode protection. Adopt Songle relay and 5.08mm quality connecting terminal. With working state indicator and fixed screw holes for easy installation. Pass 100% function and stability test. Specification Contact capacity: AC 250V 10A DC 30V 10A; Wire connection as following: 1.VCC to positive wire. 2.GND to negative wire. 3. IN1-IN4 is signal input trigger end only high level trigger effect. 4. VCC1: relay module power supply. Application Great for electric DIY. English Manual/Spec Yes Packing List 1 x Module
7034 16-Channel 12V Relay Module Board W/ Power LM2576 / Optocoupler Protection - Blue 7034 16-Channel 12V Relay Module Board W/ Power LM2576 / Optocoupler Protection - Blue Новинка

7034 16-Channel 12V Relay Module Board W/ Power LM2576 / Optocoupler Protection - Blue

1090.95 руб.
Model 7034 Quantity 1 Color Blue Material Plastic + iron + PCB Specification 12V relay contact capacity and 10A / 250V with light coupling protection; 5V or 3.3V drive; Supports all SCM drive; Plate load power module don't need external power supply; The I/O port drive low level effective Features 16-channel relay module board Application Great for DIY project and other electronic products Other 12V 16-channel relay interface board and needs 3.3V / 5V driver voltage; Equipped with high-current relay AC 250V 10A; DC30V 10A; Standard interface that can be controlled directly by microcontroller (8051 AVR PIC PLCDSP ARM ARM MSP430 TTL logic); Indication LED for each Relay's Status; Low Level is useful for driving I/O; With LM2576 Power; With optocoupler isolation Packing List 1 x Relay module board
5V 1-Channel Single Relay Module for Arduino High Level Trigger (Works with Official Arduino Board) 5V 1-Channel Single Relay Module for Arduino High Level Trigger (Works with Official Arduino Board) Новинка

5V 1-Channel Single Relay Module for Arduino High Level Trigger (Works with Official Arduino Board)

220.61 руб.
A small current signal control equipment commonly used for controlling high power electronic modules through SMC; Widely used in the SMC system to make smart home projects; Features: Single channel; 4 M2 screws positioning holes for easy installation; High drive (5V or 3.3V) normally open contact closure; NPN transistor drive current; Onboard power indicator (green) relay indicator (red)
2 Channel 12V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) 2 Channel 12V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) Новинка

2 Channel 12V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards)

247.68 руб.
Color: Red - Material: PCB - Features: 2 channel 12V high level trigger relay module - Application: Let-through or break the circuit within 10A / 220V - Package includes: - 1 x Module
4-Channel 24V Opto-isolator Relay Module w/ High Level Trigger - Blue 4-Channel 24V Opto-isolator Relay Module w/ High Level Trigger - Blue Новинка

4-Channel 24V Opto-isolator Relay Module w/ High Level Trigger - Blue

402.05 руб.
Brand N/A Model N/A Quantity 1 Color Blue Material PCB Features Good anti-interference performance use optoelectronic isolation and freewheeling diode protection. Adopt Songle relay and 5.08mm quality connecting terminal. With two groups normally open/close contact convenient to use. With working state indicator and fixed screw holes for easy installation. Pass 100% function and stability test. Specification Contact capacity: AC 250V 10A DC 30V 10A; Wire connection as following: 1.VCC to positive wire. 2.GND to negative wire. 3. IN1-IN4 is signal input trigger end only high level trigger effect. 4. VCC1: relay module power supply. Application Great for electric DIY English Manual/Spec Yes Packing List 1 x Module
4-Channel 9V Opto-isolator Relay Module w/ High Level Trigger - Blue 4-Channel 9V Opto-isolator Relay Module w/ High Level Trigger - Blue Новинка

4-Channel 9V Opto-isolator Relay Module w/ High Level Trigger - Blue

391.68 руб.
Brand N/A Model N/A Quantity 1 Color Blue Material PCB Features Good anti-interference performance use optoelectronic isolation and freewheeling diode protection. Adopt Songle relay and 5.08mm quality connecting terminal. With working state indicator and fixed screw holes for easy installation. Pass 100% function and stability test. Specification Contact capacity: AC 250V 10A DC 30V 10A; Wire connection as following: 1.VCC to positive wire. 2.GND to negative wire. 3. IN1-IN4 is signal input trigger end only high level trigger effect. 4. VCC1: relay module power supply. Application Great for electric DIY. English Manual/Spec Yes Packing List 1 x Module
1-Channel 5V 30A High-Power Relay Module for Arduino 1-Channel 5V 30A High-Power Relay Module for Arduino Новинка

1-Channel 5V 30A High-Power Relay Module for Arduino

345.03 руб.
The item is a 5V 1-channel relay interface board and it can be controlled directly by a wide range of microcontrollers such as Arduino AVR PIC ARM and so on. - 1-Channel Relay interface board - Equipped with high-current relay : DC 30V AC 250V 30A - Standard interface that can be controlled directly by microcontroller (Arduino 8051 AVR PIC DSP ARM)
4-Channel 5V Optocoupler Isolation Relay Module w/ High Level Trigger - Blue 4-Channel 5V Optocoupler Isolation Relay Module w/ High Level Trigger - Blue Новинка

4-Channel 5V Optocoupler Isolation Relay Module w/ High Level Trigger - Blue

336.39 руб.
Brand N/A Model N/A Quantity 1 Color Blue Material PCB board Features Strong anti-interference using optical isolation and diode freewheeling protection; Relay trigger part uses dual-sided thickened cloth which is safe and reliable; Uses high quality Songle relay and 5.08mm terminal; Each relay has a pull on / off indicator for easier working; Each relay output leads to two sets of normally open and normally closed electric shock convenient and flexible to use; Input and output power supply can be used one or two groups; With installed screws; VCC connects power positive; GND connects power negative; IN1-IN4 is signal input trigger port; VCC1 is the single power supply port Specification Relay trigger capacity: AC 250V 10A DC30V 10A Application Great for DIY project English Manual/Spec Yes Packing List 1 x Module
8-Channel 12V Relay Module Board 8-Channel 12V Relay Module Board Новинка

8-Channel 12V Relay Module Board

706.18 руб.
Color: Red - Material: PCB board - Input voltage: 12V - Relay is high level trigger - Trigger voltage: 12V - Trigger current: >5mA - VCC: Positive power supply input terminal - GND: Negative power supply input terminal - IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8: Relay control terminal. Input high level make the relay pull-in (Trigger current need over 5mA) input low level release relay - COM: The common terminal. Control signal negative. Short connected to GND - Power LED: When VCC and GND connected to pointed voltage - Relay LED: When relay is pull-in the LED lighting - Used to control ON/OFF within 220V / 10A - Great for DIY project
2 Channel 5V Dual Relay Module for Arduino High Level Trigger (Works with Official Arduino Boards) 2 Channel 5V Dual Relay Module for Arduino High Level Trigger (Works with Official Arduino Boards) Новинка

2 Channel 5V Dual Relay Module for Arduino High Level Trigger (Works with Official Arduino Boards)

301.83 руб.
5V Dual Relay module is a small current signal control equipment commonly used power electronic module. Can be achieved the microcontroller to control two high-power devices widely used in the MCU system to make smart home project. Module features are as follows: Dual Relay Funny and easy to use 4 M2 screws positioning holes for easy installation High drive (5V or 3.3V) normally open contact closure NPN transistor drive current Onboard power indicator (green) relay indicator (red)
24V High / Low Level Trigger Time Delay Relay Module - Red + Blue 24V High / Low Level Trigger Time Delay Relay Module - Red + Blue Новинка

24V High / Low Level Trigger Time Delay Relay Module - Red + Blue

517.83 руб.
Brand N/A Model N/A Quantity 1 Color Red + blue Material PCB Features Use advance and high quality clock chip accurate timing; Use super power relay control load maximum up to 30A; Opto-isolator trigger anti-interference and avoid false triggering; High level or low level trigger option; With selectable 8 type time range: Min. 0.1s Max. 1 hours; With potentiometer to adjust time will prolong if adjust it clockwise; With indicator for power and time delay switch. Specification Input: DC 24V quiescent current: 12mA Max. power consumption: 52mA; High level trigger requirement: Trigger voltage >7V current >3mA; Low level trigger requirement: Trigger voltage 3mA; Relay load: AC 250V 30A or DC 30V 30A; Relay life: mechanical life: 107 electrical life: 105 Application Widely use in machinery equipment automation equipment DIY PLC industrial control and 24V vehicle. English Manual/Spec Yes Packing List 1 x Module
1 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) 1 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) Новинка

1 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards)

201.02 руб.
Model N/A Quantity 1 Color Blue Material PCB Features 1 channel 5V high level trigger relay module Application Great for DIY projects Packing List 1 x Module
2 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) 2 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) Новинка

2 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards)

300.67 руб.
Model N/A Quantity 1 Color Blue Material PCB Features 2 channel 5V high level trigger relay module Application Great for DIY projects Packing List 1 x Module
One Channel 12V Relay Module w/ Opto-couplersisolation One Channel 12V Relay Module w/ Opto-couplersisolation Новинка

One Channel 12V Relay Module w/ Opto-couplersisolation

159.55 руб.
Brand N/A Model N/A Quantity 1 Color Blue + red Material PCB Features Control DC / AC signal max load: AC 250V / 10A DC: 30V/10A; Uses the technique of optical coupling isolation powerful drive energy stable performance triggering current 5mA; Specification Working voltage: 12V; The jumper setting; high and low level; power green light indicator relay module red light indicator; Interface design easy for operation; With 4 fixed screw holes; Module interface: DC + / DC - / IN / NO / COM / NC Application Great for DIY project English Manual/Spec Yes Packing List 1 x Module
2 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) 2 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) Новинка

2 Channel 5V High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards)

287.42 руб.
Color: Red - Material: PCB - Features: 2 channel 5V high level trigger relay module - Application: Let-through or break the circuit within 10A / 220V - Package includes: - 1 x Module
5V 4 Channel High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) 5V 4 Channel High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards) Новинка

5V 4 Channel High Level Trigger Relay Module for Arduino (Works with Official Arduino Boards)

480.39 руб.
Color: Red - Material: PCB - Input voltage: 5V - LEDs indicate the status of the relay channels - 4 channel relay - Be able to control various appliances with voltage at 220V and current within 10A - Package includes: - 1 x Module
High / Low Level Trigger 3-CH 12V Self-locking Switch Relay Module w/ Optocoupler High / Low Level Trigger 3-CH 12V Self-locking Switch Relay Module w/ Optocoupler Новинка

High / Low Level Trigger 3-CH 12V Self-locking Switch Relay Module w/ Optocoupler

609.99 руб.
Voltage: 12V; Quiescent current: 12.5mA; Max. current: 115mA; Interface: DC+ (12V DC anode of power supply) DC- (12V DC cathode of power supply) IN1~IN3 (1~3 channel trigger control support high or low level trigger) TRV+ (external trigger anode of power supply) TRV- (external trigger cathode of power supply) 3 microswitch(1-3 channel testing button); White wire connector (1~3 channel extension switch control); NO1NO3: normal open interface (suspended before connection and shorted with COM after connection); COM1COM3: common interface; NC1NC3: normal close interface (shorted with COM before connection and suspended after connection); Press touch button to lock corresponding relay and press it again to disconnect it; Suitable for controlling household appliances factory equipments.
FC-16-D 2-Channel 9V High Level Trigger Relay Module - Blue FC-16-D 2-Channel 9V High Level Trigger Relay Module - Blue Новинка

FC-16-D 2-Channel 9V High Level Trigger Relay Module - Blue

302.98 руб.
Model FC-16-D Quantity 1 Color Blue Material PCB Features Conform to international safety standard with isolation groove between control area and load area; Use genuine songle relay; With power and relay action indicator light on when close and off when break. ON port and COM port will connecting when there is signal at the input port. Control DC and AC signal can control 220V load with 2 normally open contacts and 2 normally closed contacts. Blue KF301 terminal connecting to control cable more easier. Specification 2 Channel 9V high level trigger Application Great for Arduino DIY English Manual/Spec Provides cable connecting manual Packing List 1 x Module

кешбака
Страницы:


Brand N/A Model N/A Quantity 1 Color Red + blue Material PCB Features Use advance and high quality clock chip accurate timing; Use super power relay control load maximum up to 30A; Opto-isolator trigger anti-interference and avoid false triggering; High level or low level trigger option; With selectable 8 type time range: Min. 0.1s Max. 1 hours; With potentiometer to adjust time will prolong if adjust it clockwise; With indicator for power and time delay switch. Specification Input: DC 24V quiescent current: 12mA Max. power consumption: 52mA; High level trigger requirement: Trigger voltage >7V current >3mA; Low level trigger requirement: Trigger voltage 3mA; Relay load: AC 250V 30A or DC 30V 30A; Relay life: mechanical life: 107 electrical life: 105 Application Widely use in machinery equipment automation equipment DIY PLC industrial control and 24V vehicle. English Manual/Spec Yes Packing List 1 x Module
купить 1pcs 30a 250v 1 channel 12v relay module high level driver high power relay